4 Common Error Codes of a Sub-Zero Ice Maker and How to Fix It

Sub Zero Ice Maker Repair | Repair Sub Zero

When a Sub Zero ice maker experiences an error code, it can be frustrating for the homeowner. You have to check out ice maker repair tips to get it working again in many cases. Repair Sub Zero in Denver can easily help you out. But why do these ice makers experience these errors in the first place?

One of the main reasons that Sub Zero ice makers experience error codes is because of the high-end features that they offer. These machines are designed for homeowners who want the best possible performance from their appliances. To achieve this level of performance, Sub Zero refrigerators use advanced technology and components.

However, these advanced features also mean a greater chance of something going wrong. When an error code does occur, it’s usually because one of the components isn’t working properly. This issue can be fixed by a qualified technician.

So if your Sub Zero ice maker experiences an error code, don’t panic. There’s a good chance it can be repaired without too much difficulty. Just make sure to call a qualified technician to look at it.

Most Sub Zero ice maker error codes are fairly self-explanatory, but a few can be a little more difficult to understand without some help. In this article, we will look at the most common Sub Zero ice maker error codes and what they mean.

If your Sub Zero ice maker is displaying an error code, the best thing to do is to consult your owner’s manual. The manual will tell you what the error code means and how to fix it.

Here are some of the most common Sub Zero ice maker error codes:Repair Sub Zero Call Us Today!

  • EC50 and EC51 are two of the most common Sub Zero ice maker error codes. They indicate a communication issue between the ice maker and the control board. If you experience these error codes, you should first check the wiring harness for visible damage. If everything looks okay, you can try resetting the control board by unplugging it for a few minutes. If the problem persists, you may need to replace the control board.
  • Another common Sub Zero ice maker error code is E68. This code indicates a problem with the water valve. If you experience this error code, you should first check the water inlet tubing for any visible damage. If everything looks okay, you can try resetting the water valve by unplugging it for a few minutes. If the error persists, the water valve would need to be changed.
  • E24 is another common Sub Zero ice maker error code. This code indicates a problem with the water supply. If you experience this error code, you should check the water pressure and ensure that the incoming water is not too hot or too cold. You can also try flushing the water lines by opening the faucet closest to the ice maker. If the issue continues, the water valve may have to be replaced.

How To Fix a Sub Zero Ice Maker?

If you have a Sub Zero ice maker that isn’t working, don’t worry – you can fix it! Here is a guide on how to do just that.

  • To begin, ensure that the ice machine is switched on. You may have turned it off by mistake. To check, look for the Sub Zero logo on the front of the machine. If it’s illuminated, the ice maker is on.
  • If you have confirmed that the ice maker is turned on and still not working, there may be a problem with the waterline. To check, remove the cover of the ice maker and look for water flowing into the tray. If there is no water flowing, the waterline may be blocked or frozen.
  • If the water line is not the problem, the next step is to replace the ice maker. This can be tricky, so make sure you have some experience with appliance repair before trying it yourself. If you don’t feel comfortable doing it, call a professional to do it for you.

Connect with Sub Zero Repair Today!

Sub-zero ice maker replacement is a much easier task than fixing the waterline, so this is likely the problem if everything else checks out.

  • To replace it, you’ll need to remove the front cover of the Sub Zero ice maker. 
  • Once you’ve done that, you’ll see the ice maker itself. Unplug it and remove it from the housing.
  • Next, install the new ice maker by plugging it in and placing it back into the housing. 
  • Make sure to connect the water line to the ice maker before putting the cover back on. 
  • Once everything is plugged in and connected, turn on the ice maker and see if it’s working.

If it isn’t working, there may be a problem with the water line or the ice maker itself. At this point, it’s best to call a professional to help you diagnose and fix the problem.

Having trouble with your Sub Zero units can be such a hassle. Let our Repair Sub Zero experts take care of that for you to avoid further complications, so call us today!

Request a Quote with Sub Zero Repair Today!

We also offer professional Sub Zero appliance repair in the Manhattan Beach area! Check it out today so you don’t miss out on our professional services in getting your appliances back to peak performance!

Contact Us

Scroll to Top